Sony SRP-X500 powered A/V matrix mixer offers an “all-in-one” solution for multimedia presentations. A totally new multimedia presentation concept unites the functions of a high quality audio mixer, wireless microphone receiver slots, RGB/video switcher, equalizer, active feedback reducer and power amplifier in a single, compact unit. Ideal for conference rooms and lecture theatres as well as a wide range of other presentation applications, the Sony SRP-X500P powered mixer reflects a major trend in modern presentations towards combining wireless and wired microphones with audio from multimedia sources ranging from video recorders and DVD players to notebook PCs and LCD projectors.

* 5 x 1 AV switcher contains 2-RGB/component video inputs and 3-composite video inputs (each with stereo audio)

* Integrated high quality audio mixer with 4-microphone and 1 stereo line input

* Mounting slots built in for two (optional UTX-M1) wireless mic diversity receiver modules

* Audio signal processing includes digital equalizer and dynamics processing for each microphone channel, plus on-board digital feedback reducer

* Built-in 4ch digital power amplifier

* Scene storage, plus last memory recall

* RS-232C and parallel input ports for remote control from a PC, third party system controller or control panel

* RS-232C output port for remote control of applicable video/data projector or plasma display panels * PC setup software supplied

FEATURE	BENEFIT
All-in-One Design	Similar to the flagship model SRP-X700P, the SRP-X500P integrates the functionality of seven devices to manage today's modern presentation system. The 7 key functions include; RGB Switcher, Video Switcher, Wireless Tuner Base Unit, Audio Mixer, Power Amplifier, Feedback Reducer and Equalizer
High Quality Digital Processor>	The SRP-X500P is equipped with digital feedback reduction function for each microphone input channel. It can be enabled to seek out the frequency, in which howling is likely to occur, and suppress the howling by reducing the amplifier gain with 5 band equalization.
Enhanced User-Friendly System Presets	The SRP-X500P supports various AV system configurations without any meticulous manual adjustments, by selecting a System type from the nine system presets. Alternatively, system integrators can customize parameter settings to optimize audio signal routing, and output audio delay settings.
Versatile Interface	The SRP-X500P is equipped with three composite inputs and two RGB/Component inputs. The SRPX500P supports high-resolution component signals such as 480p and 1080i, and also SXGA (1280 X 1024 pixels) for RGB. The SRP-X500P is equipped with four microphone inputs and two stereo line inputs.
Integrated Wireless Mic Tuner Slots	Up to two optional wireless tuner modules, the UWP-X1/X2 series or the WRU-806 can be directly installed in the SRP-X500P, making it simple to integrate a high quality Sony wireless microphone system into the presentation system. Please note : UWP Series models and WRT-WRU-806 Series models are not compatible with one another.
Comprehensive Remote Control	The SRP-X500P provides extensive control capabilities through its Control-S, RS-232C and parallel port or an optional RM-AV3000 series Wireless Remote Commander.
Built-in Four-Channel Digital Power Amplifier	The SRP-X500P is equipped with four-channel digital power amplifiers that can be switched between high and low,br> impedance modes corresponding to various loudspeaker and room types.
Easy-to-Use GUI	The SRP-X500P is supplied with the Widows-based software program, the SRPX500P Manager. The SRP-X500P Manager program allows easy configuration of the system during installation, including control of audio processing settings, such as equalizer, AGC, and compressor using a simple and intuitive GUI.

Included Accessories: AC power cord, Antennas (2), Control software CD-ROM, Feet (4), Operation manual
SRP-X500P Software Manual
SRP-X500P Operation Manual
SRP-X500P Protocol Manual

Specification	Detail
Audio Frequency Response	10Hz to 20KHz +/-0.5dB (with LINE OUTPUT 1 kHz reference)
Audio T.H.D.	0.01% or less (with LINE OUTPUT 1 kHz reference)
Audio S/N Ratio	94 dB or more (LINE OUTPUT, IHF-A)
Audio Crosstalk	80 dB or less (between LINE channels, 1 kHz with input cut-off)
Video Frequency Response	50 Hz to 10 MHz
Component/RGB Frequency Response	50 Hz to 150 MHz, 480i,1080i, supports 1280 x 1024 60Hz (SXGA)
Audio Inputs; Mic Inputs 1 to 4	Connector: XLR-3-31 type Circuit: Balanced Reference Input Level: -60 to -30 dBu Maximum Input Level: -37 to -7 dBu Impedance: 2.2 K ohm or more
Audio Inputs; Line IN / AV INPUT A to E	Connnector: Phono Jack Circuit: Unbalanced Reference Input Level: -60 to -30 dBu Maximum Input Level: +10 dBu Impedance: 10 K ohm
Audio Outputs; Line Output 1 to 4	Connector: Phono Jack Impedance: 10 K ohm Reference Level: -5 dBu Maximum Level: +15 dB Impedance: 10 K ohm or more
Audio Outputs; Speaker Output CH 1/2	erminal: Screw Type Maximum Output: 90 W (4 ohm, 8 ohm) Load Impedance: 4 ohm to 16 ohm
Audio Outputs; Speaker Output CH3/4	Terminal: Screw Type Maximum Output: When Low Impedence is Selected=50 W (4 ohm, 8 ohm) Maximum Output: When 70V Line is Selected=60W (82 ohm) Load Impedance: When Low Impedance is Selected= 4 ohm, 16 ohm Low Impedence: When 70V Line is Selected= 82 ohm to 10 K ohm
Video Input; AV RGB Input - Video A to C	Connector: Phono Jack Signal Format: Composite Level: 1 V p-p Impedance: 75 ohm
Video Input; AV RGB Input-Component RGB D-E	Connector: HD D-sub, 15-pin
Video Input; AV RGB Input-Component RGB D-E	Signal Format: RGB/Component Level: Video Signal = 0.7 V p-p Level: Sync Signal= 1 to 5 V Impedance: Video Signal= 75 ohm Impedance: Sync Signal= 47 K ohm
Video Output; Output Component/RGB	Connector: HD D-sub, 15-pin Signal Format: RGB/Component Level: Video Signal = 0.7 V p-p Level: Sync Signal= 1 to 5 V Impedance: Video Signal= 75 ohm Impedance: Sync Signal= 47 K ohm
Video Output; Output Video	Connector: Phono Jack Signal Format: Composite Level: 1 V p-p Impedance: 75 ohm
Remote Connector; Projector Control	RS-232C, D-Sub 9-pin (male)
Remote Connector; Control S IN/OUT	Mini Jack
Remote Connector; Parallel Remote Control	D-Sub, 25-pin (female) Input Pins: Make Contact Input Input Pin Logic: C-MOS Level Active L, Input Pulse Width= 100msec or more Output Pins: Open Collector Output Output Pin Voltage: Withstand voltage= +24 V or less, Maximum Sink Current=40mA
Remote Connector; Serial Remote Control	RS-232C, D-Sub 9-pin (male)
Other Connectors	Antenna In A/B Connectors, BNC-type, Supplies +9 V DC +48 V Power Supply: Supplies power to Mic Input 1 to 4 connectors (XLR) when 48V ON/OFF selector set to ON
Power Requirement	AC 120V, 60 Hz
Power Consumption	120 W
Dimensions	19 x 5 1/4 x 14 inches (W/H/D), excluding protrusions
Mass	26 lb. 3 oz.
Operating Temperature	32 to 104 Degrees F
Storage Temperature	-4 to 140 Degrees F