The DMX-P01 digital mixer is a lightweight and portable field mixer developed for electronic news gathering (ENG) and electronic field production (EFP). The unit has 32-bit, full digital sound processing and its unique Scene Memory Recall feature enables users to instantly recall up to ten different user-defined parameter settings, providing the DMX-P01 portable digital mixer with the ability to store and recall settings including limiter and compressor. This allows users to recall favorite settings instantly, which is very useful when switching between different recording environments.

Highlights

* Outstanding audio quality
* User-friendly
* Full 24 bit processing
* Sampling rate of either 48 kHz or 96kHz
* Front panel controls
* Panel lock and parameter lock functionality
* Lightweight

Feature	Benefit
Excellent sound quality/Full digital processing	Provides outstanding sound quality for ENG and EFP applications
Backlit LCD panel	Unit can be used in low-light conditions
Flexible meter scales	Meter calibrations can be easilty changed from one type to another without the need to replace the entire meter
Camera-audio return-level check	Verify that the mixer's audio level matches the level recorded to the camcorder
Memory function	Users can effortlessly store and recall parameters from the setup menu
Power-on memory recall
Scene memory recall	Allows system to recall parameters in three different ways: with the default factory settings, with the same settings as the last time the unit was used, or with the parameters of one specific scene memory Allows users to recall up to ten different user-defined parameter settings or the factory default settings
Digital cascade	For applications requiring additional inputs, DMX-P01 mixers can be cascaded using a digital cascade connection. Sound quality is not degraded as it would be when cascading analog mixers.
Digital Output	Used to send audio to digital peripheral equipment such as DAT recorders

Included Accessories:12-pin multi-connector (x1), Meter scale sheets (6 types), Battery Holders (x2), Feet (4), Operation instruction CD-ROM (x1), Operation Instructions (x1)

Sony DMX-P01 Quick Spec
Sony DMX-P01 more info

Outputs

Specification	Detail
Inputs
Analog inputs	4 ch, XLR-3-31 (x4), electrically balanced, microphone power; + 48 V (on/off) Mic level: - 70 to -30 dBu (max. 0 dBu), 2.2kohm or more Line level: -30 to +10 dBu (max. +24 dBu), 10kohm or more
Cascade input (digital)	Phase reverse on channels 2 and 4 2 buses (L/R), S/PDIF (IEC 60958 coaxial), phono, 75 ohm
Master outputs (analog)	2 ch (L/R), -60/-10/+4 dBu (max. +24 dBu), XLR-3-32 (x2), balanced, 600 ohm load or more
Digital outputs	2 ch (L/R), AES/EBU, XLR-3-32 (x1), electrically balanced, 110 ohm load or more
Cascade output (or S/PDIF output)	2 ch (L/R), S/PDIF (IEC 60958 coaxial), phono, unbalanced 75 ohm load or more
Tape outputs (analog)	2 ch (L/R), -10 dBu (max. -10dBu), 3.5mm dia. TRS jack, unbalanced, 10 kohm load or more
Camera send/return	2 ch (L/R), 12-pin Tajimi, balanced Send level: -60/-10/+4 dBu (max. +24 dBu), 600 ohm load or more Return level: 0 dBu (max. +20 dBu), 10kohm or more
A/D converter	24 bits
D/A converter	24 bits
Sampling frequency	48 kHz or 96kHz
Signal processing	32 bits
Low cut filter	50Hz to 400Hz (48kHz sampling) 70Hz to 400Hz (96kHz sampling) 12dB/octave in both 48kHz and 96kHz sampling
Input/output limiter	Threshold: 0 to +20 dB
Output compressor	Threshold: -20 to +10 dB, ratio, 2:1 to 10:1, attack time: 0.5 to 100.00 ms, release time: 0.1 to 2.0 s
Frequency response	20 Hz to 40 kHz +0.5/-3.0 dB (at 96 kHz sampling frequency) 20 Hz to 20 kHz +0.5/1.0 dB (at 48 Khz sampling frequency)
Total Harmonic distortion	Less than 0.05%
Equivalent input noise	-126 dBu (IHF-A)
Crosstalk	Less than -90 dB (1kHz)
Level meter calibration	VU, BBC-type DIN-type, NORDIC-type, IEC-type1, dBSF (selectable)
Monitoring	1/4-inch TRS jack (x1) and 3.5mm dia. TRS jack (x1) with level control
Operating Voltage
Internal	DC 12V (eight AA-size (LR6) alkaline batteries)
External	DC 12 V via DC jack or DC 10 to 15 V via an XLR 4-pin connector
Battery life	5 hours or more with Sony AA-size alkaline batteries (LR6SG) at 25° C
Power supply (to wireless microphone)	DC 12 V via 4-pin Hirose connector
Operating temperature	-5 to +40° C (+23 to +104° F)
Storage temperature	-30 to +70° C (-22 to +158° F)
Dimensions (w x h x d)	266 x 68 x 206 mm ( 10-1/2 x 2-3/4 x 8-1/8 inches)
Weight	Approximately 2.2 kg (4lb 13 oz)