Digi's digital expertise married with PMC's monitoring technology results in a world-class studio monitor.

Digidesign RM2 Reference Monitor Series Powered Studio Monitor Features:

• Professional, bi-amplified monitor
• Analog and digital inputs (up to 24-bit/96 kHz)
• Audiophile-grade, analog-controlled Class D amplifiers with high-quality linear power
• supply units
• Advanced Transmission Line technology provides high sound pressure level (SPL) and
• superior bass extension
• Unrivaled tonal accuracy, clarity, and dynamic range with exceptionally low distortion
• Powerful onboard DSP engine provides:
• Extremely accurate digital crossover for pristine imaging
• Bass Port Emulation mode to emulate tonal characteristics of ported bass
• reflex speakers
• Precise gain trim, low- and high-frequency adjustment, and speaker placement
• settings
• Low jitter analog-to-digital converter (ADC) with low-noise clock oscillator
• Sound dispersion design maintains accurate frequency response even in off-axis
• listening positions

The Degidesign RM2 is a professional, bi-amplified, near-field monitor that offers incredible sound accuracy. The RM2 features a 6.7-inch low frequency driver, a smaller footprint than the competition that doesn't compromise power or sound quality, and is ideal for recording studios, mixing suites, post-production facilities, broadcast installations, and other rooms that require a higher sound pressure level and even lower bass extension.

Co-developed with PMC (the Professional Monitor Company), the Digidesign Reference Monitor Series unites Digidesign's deep expertise in digital audio with PMC's legacy of fine, handcrafted, cutting-edge design and meticulous manufacturing. Together, Digidesign and PMC have created specially engineered monitors that employ PMC's groundbreaking Advanced Transmission Line (ATLTM) technology and deliver unrivalled tonal accuracy, low distortion, accurate bass response, stunning clarity, and incredible dynamic range.

Because of ATL technology, the RM2 can deliver higher volumes and lower bass extension than other speakers of similar sizes even if identical or larger drivers are used. The frequency response also remains consistent regardless of how high or low listeners adjust the volume, meaning they won't need to crank the monitors to achieve maximum bass response. The RM2 is also designed for a wide sound dispersion, so listeners will get accurate frequency response even when they're listening in an off-axis position.

Digidesign RM2 Reference Monitor Series Powered Studio Monitor Specifications:

• General
• Frequency Response: 40 Hz - 25 kHz
• Peak SPL at 1 meter: 113 dB
• Effective Line Length: 4.9 feet (1.5 meters)
• Low Frequency Drive Unit: 6.7-inch (170 mm) doped cone with cast alloy chassis
• High Frequency Drive Unit: 1-inch (27 mm) fabric soft dome with ferrofluid cooling
• Crossover Frequency 3 kHz
• HF Adjustment -4 dB to +3 dB in 0.5 dB steps; corner frequency 1 kHz
• LF Adjustment: 4 dB to +3 dB in 0.5 dB steps; corner frequency 500 Hz
  
  Input Connectors
• Analog: XLR Female PIN 1 GND, PIN 2 +, PIN 3 -
• Digital (AES/EBU): XLR Female PIN 1 GND, PIN 2 +, PIN 3 -
• Input Impedance: 22k Ohm
  
  Sensitivity
• Input Level for Full-Scale Output: Adjustable from +4 dBu to +19 dBu
• Gain Trim: Nominal gain setting from 0 dB to -15 dB in 1 dB steps
  
  Analog to Digital Specifications
• Maximum Input Level: 20.9 dBu
• Signal to Noise Ratio: 111 dB A-weighted
• THN + Noise: -95 dB
• Conversion Rate: 24-bit / 96 kHz
  
  Digital to Analog Specifications
• Output Voltage: 6.37 VRMS
• Signal to Noise Ratio: 110 dB A-weighted
• THD + Noise: -95 dB
  
  Power Amplifier
• Output Power LF: 100 Watts, HF: 50 Watts
• THD + Noise: 0.05%
• Signal to Noise Ratio: 125 dB
• Frequency Response DC: - 50 kHz
  
  Dimensions (H x W x D): 15.75 x 7.64 x 14.57 inches, (400 mm x 194 mm x 370 mm)
• Weight: 20 lbs (9 kg) per unit
• Finish: Dark grey texture